How Do You Clean The AC In Your House?

How Do You Clean The AC In Your House?

Every appliance in your household needs regular cleaning and maintenance. This rule applies to your air conditioning unit as well. Proper cleaning of the ac unit can ensure its optimum performance, and it keeps the system from frequent AC repair in St Paul, MN.

Your AC has an indoor and outdoor unit. One must clean both of these units at least once every few months to ensure proper cooling. You can perform a DIY cleaning following the safety protocols, but in case of an emergency AC repair in St Paul, call for professional help immediately.

How To Clean The Outdoor AC Unit

The outdoor unit of your air conditioner is exposed to a lot of dust and debris. Therefore the outdoor AC unit needs more extensive cleaning. Follow the steps given below to ensure optimum cleaning:

Step 1: Turn off the electrical supply

This is the most important step, as your safety is the top priority. Use rubber gloves and switch off your AC unit before starting the cleaning process.

Step 2: Clean the condensing unit

If your AC unit is not cleaned timely, the condensing unit will be coated with dust all around. With the help of a vacuum cleaner, you can remove the dust and dirt. Gently remove the fins from the unit and wash them with a water hose, then dampen them using a clean cloth.

Remember to clean the bottom of the pan as well. It may collect fallen leaves, dirt, and grass.

Step 3: Clean the AC coils

Be careful while using an AC coil cleaner. This cleaner can cause burns and is extremely dangerous. Read the instructions, leave the cleaner on for 10-15 minutes, and wash it off with the hose.

Step 4: Assemble and testing

Assemble the AC unit, straighten the fins and turn on the electricity supply to see if the unit is working efficiently.

How To Clean The Indoor Unit

Before beginning the air door unit cleaning, ensure you turn off the electricity supply and let the AC dry out in case it holds any moisture.

Step 1: Clean the air filters

The air filters can be extremely dirty. Unfasten them and wash off the dirt thoroughly before you fix them back on.

Step 2: Clean the evaporator coils

Spray an efficient evaporator coil cleaner as per the instructions and after 10-15 minutes, dampen the product with a clean cloth.

Step 3: Clean the drain pipe

With the help of a vacuum cleaner, suck out the debris from the drain pipe and use an anti-fungal spray to prevent bacteria.

Step 4: Assemble and test

Reconnect the electrical supply to check if the AC is running properly. Keep the AC unit on maximum cooling to collect the debris. After this process, you can ensure the maximum cooling effect.

Call us at (612) 791-0850 for emergency AC repair in St Paul, and get our best technicians at your service.